Milk Half Gallon Tutorial, Little bit more complex bottle with handle & details Rating Options

[ragde]

Hello friends:

For the colleagues that enlisted for this tutorial... and for all of you, here we are...

This is the project for this tutorial, so be prepared...
 Final_Rendering.jpg ( 91.94K ) Number of downloads: 616

We are going to start in few hours from now

See you all !!

[ragde]

Let's begin...!
 Tut_01_Sketch_N1.jpg ( 51.71K ) Number of downloads: 476

Now, create a Plane parallel to the Top Plane at 250mm from it.
And draw the next sketch...
 Tut_02_Sketch_N2_Circle.jpg ( 30.43K ) Number of downloads: 235


Now, select the Front Plane and draw this...
 Tut_02_Sketch_N3_Lateral.jpg ( 38.95K ) Number of downloads: 219


 Tut_02_Sketch_N4_Lateral.jpg ( 44.85K ) Number of downloads: 171


 Tut_02_Sketch_N5_Lateral.jpg ( 40.92K ) Number of downloads: 177


 Tut_02_Sketch_N6_Lateral.jpg ( 38.91K ) Number of downloads: 190

[ragde]

 Tut_02_Plane2.jpg ( 74.05K ) Number of downloads: 190

[ragde]

 Tut_02_Sketch_7_Copied.jpg ( 61.74K ) Number of downloads: 169

Now we have the Sketch7.
Let's fully define this sketch...
 Tut_02_Sketch_7_Fixed.jpg ( 112.6K ) Number of downloads: 211


 Tut_02_Initial_Loft_09.jpg ( 157.13K ) Number of downloads: 231


Probably your asking why we did not "Surface extrude" the Skecth1 instead of making a Loft.
Yes, it is more simple, but it is a good idea to now how to copy Skecthes and reuse them..

 Tut_02_Top_Loft_10.jpg ( 160.97K ) Number of downloads: 153

[ragde]

Knit the two Lofts...  Tut_02_Knit1__11.jpg ( 24.92K ) Number of downloads: 135

Now we will create a plane in an angle, but first we must create an auxiliary Axis...
 Tut_02_Axis_1_for_Angled_Plane_12.jpg ( 105.77K ) Number of downloads: 136


 Tut_02_Angled_Plane_13.jpg ( 105.3K ) Number of downloads: 135


 Tut_02_Trim_Sketch14.jpg ( 53.6K ) Number of downloads: 137


 Tut_02_Trim_Operation_15.jpg ( 99.53K ) Number of downloads: 134


 Tut_02_Trim_Operation_16.jpg ( 44.7K ) Number of downloads: 144


Well guys, here is a little late... I am going to sleep...

See you tomorrow!

[ragde]

Ok guys, let's continue...
 Tut_02_Skecth_Arc__17.jpg ( 74.61K ) Number of downloads: 135

Now the next skecth...
 Tut_02_Skecth_Outside_of_Handle_18.jpg ( 123.96K ) Number of downloads: 283

[ragde]

 Tut_02_Surface_Loft_19.jpg ( 160.6K ) Number of downloads: 207


Well done!
 Tut_02_Surface_Loft_20.jpg ( 42.98K ) Number of downloads: 121

[ragde]

 Tut_02_3D_Spline_21.jpg ( 116.71K ) Number of downloads: 130


 Tut_02_3D_Trim_1__22.jpg ( 46.98K ) Number of downloads: 105


 Tut_02_3D_Trim_2__23.jpg ( 100.49K ) Number of downloads: 120


Of course, as you suspected...
 Tut_02_3D_Mirror__24.jpg ( 57.02K ) Number of downloads: 109


 Tut_02_Plane_4__25.jpg ( 91.36K ) Number of downloads: 107


 Tut_02_HSection_Sk__26.jpg ( 62.38K ) Number of downloads: 128

[ragde]

 Tut_02_HOpening_Sk__27.jpg ( 105.89K ) Number of downloads: 136

[ragde]

 Tut_02_Handle_Loft__28.jpg ( 142.73K ) Number of downloads: 203


 Tut_02_Very_Nice_Handle__29.jpg ( 62.76K ) Number of downloads: 124


Well guys, we will continue later...

See you around... and

GOOD MODELLING !

[bowlofnoodle]

Great work! Nice tip on creating the handle. Keep them bottles coming.

[ragde]

Thanks Bowlofnoodle !
Let's continue...

Now, use Planar Surfaces to close the Top and the Bottom of the bottle.
Then, Knit all surfaces and convert into a Solid.

[ragde]

Now give it a 12mm radius at the bottom of the bottle
 Tut_02_Radius_12mm___30.jpg ( 51.65K ) Number of downloads: 106

[ragde]

 Tut_02_Radius_Handle__31.jpg ( 109.59K ) Number of downloads: 98


Sometimes you have to build your own fillets...

[ragde]

And here we are...
 Tut_02_Radius_Split___31.jpg ( 69.94K ) Number of downloads: 115